Denon PMA-2500NE Owner's Manual page 36

Contents Connections
B Click the "Advanced" tab.
C Select the sampling rate and bit rate to be applied to the D/A
converter.
It is recommended that "2 channel, 24 bit, 192000 Hz (Studio
0
Quality)" is selected (Windows 7).
It is recommended that "2 channel, 32 bit, 192000 Hz (Studio
0
Quality)" is selected (Windows 8/8.1).
D Click "Apply".
E Click "Test".
Check that audio from this unit is output from the PC.
0
Front panel Rear panel
Playback Settings
NOTE
0 The dedicated driver must be installed in the PC before this unit is connected to a
PC. Operation will not occur correctly if connected to the PC before the dedicated
driver has been installed.
0 Operation may fail in some PC hardware and software configurations.
0 Player software supporting the Audio Stream Input Output (ASIO) driver is
required to play files with a sampling frequency of 352.8 kHz/384 kHz without
downsampling. Check your player software before playing files with the ASIO
driver.
0 Please see the FAQ at www.denon.com if you experience any issues getting audio
to play from your computer through the PMA-2500NE. You may also want to check
the support pages for your audio player application.
w
t
e
r
36
Remote control
unit
Tips
Index
Appendix