Denon PMA-2500NE Owner's Manual page 35

Contents Connections
6
Press X on this unit.
When the unit power is turned on, the PC automatically finds and
0
connects to the unit.
7
Press INPUT SELECT to switch the input source to
"USB-DAC".
8
Checking the installed driver.
A Click the "Start" button and click "Control Panel" on the PC.
The control panel setting list is displayed.
0
B Click the "Sound" icon.
The sound menu window is displayed.
0
C Check that there is a checkmark next to "Default Device" under in
"Digital Audio Interface PMA-2500NE" of the "Playback" tab.
When there is a checkmark for a different device, click "Digital
0
Audio Interface PMA-2500NE" and "Set Default".
Front panel Rear panel
Playback Settings
9
35
Remote control
unit
Tips
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A Select "Digital Audio Interface PMA-2500NE" and click
"Properties".
The PMA-2500NE Properties window is displayed.
0
PMA-2500NE
Index
Appendix
q