Refrigerator Features; Refrigerator Shelves; Shelves And Shelf Frames; Tuck Away Shelf - KitchenAid KRFF707ESS Use & Care Manual

REFRIGERATOR FEATURES

Refrigerator Shelves

The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open and save energy.

Shelves and Shelf Frames

To remove and replace a shelf/shelf frame:
1. Remove the shelf/frame by tilting it up at the front and lifting
it out of the shelf supports.
2. Replace the shelf/frame by guiding the rear shelf hooks
into the shelf supports. Tilt the front of the shelf up until
rear shelf hooks drop into the shelf supports.
3. Lower the front of the shelf and make sure that the shelf
is in position.
Shelves with under-shelf lighting (on some models):
The hooks on the rear of the shelf must be fully engaged in
the shelf supports to maintain proper electrical flow.
No more than two shelves with under-shelf lighting may be
used in the refrigerator at one time.
26
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
Tuck Away Shelf (on some models)
To remove and replace a shelf/shelf frame:
1. Remove the shelf/frame by tilting it up at the front and lifting
it out of the shelf supports.
2. Replace the shelf/frame by guiding the rear shelf hooks into
the shelf supports. Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports.
3. Lower the front of the shelf and make sure that the shelf is
in position.
To retract and extend the front section of the shelf:
1. To retract the front-section of the shelf, slightly lift up on the
front edge and push the adjustable portion of the shelf back
toward the rear of the refrigerator.
2. Extend the front of the shelf by pulling the retracted portion
of the shelf outward until it is fully extended.