Technical Specifications - Motorola P1001 User Manual

Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation.
The term "IC: " before the certification/registration number only signifies that the Industry
Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN is an
indication of the maximum number of devices allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the RENs of all the devices does not exceed
five.
This product meets the applicable Industry Canada technical specifications.

Technical Specifications

RF frequency band
Channels
Operating temperature
Telephone base Voltage (AV
voltage, 60Hz)
Telephone base
voltage(Adapter output)
Handset voltage
Charger voltage (Adapter
output)
General information
1921.536 MHz -1928.448 MHz
5
5ºC to 45ºC
96 — 130 Vms
VDC, 4 0 mA
2.4V 500mAh Ni-MH battery pack
6V AC, 00mA for Handset Charger
33