Table of Contents
Advertisement
15
ELECTRICAL SYSTEM
Main work
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the bat-
tery, and to test the alternator. With this device, you cannot overcharge the battery.
Info
Never remove lid
–
Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
–
Position the negative cable and mount and tighten the screw.
M00729-11
Finishing work
–
Mount the battery cover. (
–
Mount the front rider's seat. (
–
Set the clock. (
.
3 months
p. 93)
p. 82)
p. 54)
127
Advertisement
Table of Contents
