2.2.
Indoor Unit
AUTO
OFF / ON
Automatic Operation Button
• Press for < 5 second to operate Automatic
operation mode. Used when the remote control
cannot be used.
• Press for ≥ 5 second to operate Cooling
operation mode and compressor force to on
("beep" sound will heard). Used when test
running or servicing.
• Within 20 second of Cooling operation, press
continuously for 5 second to enter various
setting mode. "beep, beep" sound will be heard.
(Used to toggle remote control signal receiving
sound or select remote control transmission
code).
Operation Indication Lamps (LED)
•
(Green) ............. Lights up in operation,
POWER
•
TIMER
(Orange) ............ Lights up in Timer
•
QUIET
(Orange) ............. Lights up in Quiet
•
(Orange) ...... Lights up in Powerful
POWERFUL
•
(Green) .................. Lights up in Ionizer
ION
•
SUPER
ALLERU-BUSTER
Operation Mode
• Heating, Cooling, Soft Dry and Automatic
Operation.
Powerful Operation
• Reaches the desired room temperature quickly.
Timer Operation
• Delay OFF/ON Timer control.
Quiet Operation
• To provide quiet operation.
Ionizer Operation
• Generate and discharge negative ion.
blinks in Automatic
Operation judging and
Hot Start operation.
Setting.
Operation.
Operation.
Operation.
(Blue) ... Lights up in operation.
CS-W7DKE CU-W7DKE / CS-W9DKE CU-W9DKE / CS-W12DKE CU-W12DKE
Random Auto Restart Control
• Unit will be restarted, when resume from power
failure, at previous setting.
Indoor Fan Speed Control
• Manual control fan speed (High, Medium and
Low).
• Automatic fan speed.
Airflow Direction Control
• Vertical airflow control can be adjusted
automatically or manually by remote control.
• Horizontal airflow can be manually adjusted by
hand.
Anti-Freezing Control
• To prevent indoor heat exchanger from freezing.
Starting Current Control
• To reduce the starting current.
Time Delay Safety Control
• Restarting is inhibited for appro. 3 minutes.
7 Minutes Time Save Control
• To reduce the built up humidity inside the room.
Anti-Dew Formation Control
• Anti-Dew Formation Control for indoor unit
discharge area.
30 Minutes Time Save Control
• Heating operation only.
Hot-Start Control
• To prevent cold air being discharge during
Heating operation starts.
Anti Cold Draft Control
• To prevent the cold draft during Heating mode
operation in thermo off condition.
5