HP ProLiant DL360p Gen8 Maintenance And Service Manual page 53

Extend the server from the rack (on page 26).
3.
Remove the access panel
4.
Remove the heatsink ("Heatsink" on page 49).
5.
Open each of the processor locking levers in the order indicated, and then open the processor
6.
retaining bracket.
Remove the processor from the processor retaining bracket.
7.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
("Access panel" on page 27).
Removal and replacement procedures 53