HP ProLiant DL360p Gen8 Maintenance And Service Manual page 33

Remove the power supply from the power supply bay.
7.
If you are not immediately replacing the power supply, install the safety cover.
8.
To replace the component:
If you are not using an optional Hewlett Packard Enterprise input cable or the ring tongues you
1.
crimped previously, with the ground cable disconnected from the 48V power source, crimp the ring
tongues to the power and ground cables coming from the 48V source.
IMPORTANT: The power supply uses two power ring tongues and one ground ring tongue.
They are not interchangeable.
Removal and replacement procedures 33