Remove the DVD drive from the server.
b.
The server may look different than the one shown in the following illustration, depending on the
server model.
Disconnect the SATA DVD cable from the rear of the DVD drive.
c.
For LFF drives, do the following:
7.
Remove the DVD drive from the server.
a.
You may need to disconnect the SATA DVD cable from the system board to fully remove the
DVD drive from the drive bay.
Disconnect the SATA DVD cable from the rear of the DVD drive
b.
cabling" on page 65).
To replace the component, reverse the removal procedure.
("DVD-ROM and DVD-RW drive
Removal and replacement procedures 38