Monitoring Chassis Components
Monitoring Chassis Components
Viewing Chassis Slot Information
To view basic slot information, enter the show module command at the CLI prompt:
-> show module
To view more detailed information, use the show module long command:
-> show module long
Monitoring Chassis Temperature
The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range. Refer to the
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations on
page
2-10.
To check the switch's current temperature status, use the
-> show temperature
For more information about this command, see the "Chassis Management and Monitoring Commands"
chapter in the OmniSwitch CLI Reference Guide.
page 2-32
page 2-4
for more information.
show fantray
OmniSwitch 6900 Hardware Users Guide
Chassis and Power Supplies
command. For example:
February 2012