Receiver - Samsung ME40A User Manual

8
The connected device is not
displayed.
The product sound is not
output through the receiver.

8.12.3 Receiver

Sound is played through the receiver.
Downloaded From TV-Manual.com Manuals
System
Problem Possible Solution
Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI cable is properly connected.

Check whether Anynet+ (HDMI-CEC)

setup menu.
Search Anynet+ devices again.

Anynet+ requires an HDMI connection. Make sure the device is

connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.

If the connection is terminated because there has been a power

failure or the HDMI cable has been disconnected, please repeat
the device scan.
Connect the optical cable between product and the receiver.

is set to On in the Anynet+
160
8 System