Wired Network Settings - Samsung ME40A User Manual

7

7.1.2 Wired Network Settings

O
Set the network connection to use various Internet services such as
upgrades.
Automatic Network Setup
Use the Automatic
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1
2
3
Downloaded From TV-Manual.com Manuals
Network
access the Internet so you do not have to enter them manually. Most home networks are Dynamic
Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must
enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable
Setup Screen when you set up the network connection. To get the IP address, subnet mask,
gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL
modems that support DHCP also let you use Static IP addresses.
MENU Network Network Settings
Network Settings
Go to the Network Settings
Select Wired, press [ ], and then press [
The network test screen appears and verifies the network connection. When the connection has
been verified, the "Internet is connected
If the connection process fails, check the LAN port connection.

If the automatic process cannot find the network connection values or if you want to set the

connection manually, go to the next secton,
ENTER
when connecting your product to a network that supports DHCP.
screen.
] again.
successfully." message appears.
Manual Network
AllShare and perform software
Setup.
7 Network
131