Samsung ME40A User Manual page 105

4





Downloaded From TV-Manual.com Manuals
Screen Adjustment
3D Mode
Off
3D 3D
3D 2D
Side by Side
Top & Bottom
Line by Line
Vertical Stripe
Checker Board
Frame
Sequential
Some file format may not supported the "2D

"Side by Side" and "Top & Bottom" are available when the resolution is 720p, 1080i and

1080p in HDMI and USB mode or when set to PC and the PC is connected through an HDMI
/ DVI cable.
"Vertical Stripe", "Line by Line" and "Checker Board" are available when the resolution is set

to PC and the PC is connected through an HDMI / DVI cable.
"Frame Sequential" displays the frequency (60Hz only) when the resolution is set to PC.

3D Effect: Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input

source.
Manual: Manually adjust the perspective and depth settings.

L/R Change (L/R Image /
3D 2D (Off / On): Displays the image for the left eye only.
This function is deactivated when
3D Auto View (Off / Message Notice
"Side by Side" format HDMI signal with one of the resolutions below is automatically switched to 3D.
If you set 3D Auto View to
appears when the product receives a 3D signal.
If a 3D failure occurs due to a 3D information error, set

select a 3D Mode
3D Optimize (or 3D Optimisation): The overall adjustment of 3D effect.
Support resolution (16:9 only)
Operation
Turns the 3D function off.
Changes a 3D image to 2D.
Displays two images next to each other.
Displays one image above another.
Displays the images for the left and right eye alternately in
rows.
Displays the images for the left and right eye alternately in
columns.
Displays the images for the left and right eye alternately in
pixels.
Displays the images for the left and right eye alternately in
frames.
R/L Image): Swap the left and right pictures.
3D Mode set to "2D
(or Message Alert) / On): If
Message Notice (or Message
using the corresponding menu.
3D."
3D" or Off.
3D Auto View is set to On, a
Alert), a pop up message window
3D Auto View to Off
4 Screen Adjustment
and manually
105