Bd Wise; Auto Power; Standby Control; Lamp Schedule - Samsung ME40A User Manual

8

8.11.3 BD Wise

Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which
support
optimal resolution.

8.11.4 Auto Power

Enabling this option will automatically power on the product if the power cable is connected.

8.11.5 Standby Control

You can set the screen standby mode to be applied when an input signal is received.




8.11.6 Lamp Schedule

Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.

8.11.7 OSD Display

Displays or hides a menu item on the screen.

Downloaded From TV-Manual.com Manuals
System
BD Wise. When BD Wise
Available when you connect Samsung products that support
product.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message "No Signal" will appear if no source device is connected.
On
Power-saving mode will activate if no input signals are detected.
Off
The message "No Signal" will appear if no input signals are detected.
The Standby Control option is only enabled when

If "No Signal" is displayed although a source device is connected, check the cable

connection. Refer to page 50 for details about connecting source devices.
Source OSD / No Signal OSD
is turned On, the picture mode is automatically changed to the
/ MDC OSD
BD Wise through an HDMI cable to the
Source is set to PC or DVI.
8 System
155