Ad Hoc Network Setup - Samsung ME40A User Manual

7
5
6
Priority QOS
This Priority QOS function is unique to Samsung wireless routers.
You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD
players etc. But, when you connect a Samsung product to a Samsung wireless router, the Samsung
wireless router gives the Samsung product a priority connection.
This ensures you get the highest quality streaming contents and the fastest throughput speed.



7.1.7 Ad Hoc Network Setup

You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP
through the product. When connected to a mobile device, you can use files on the device or connect to
the Internet using the
How to set up using Ad hoc
1
2
3
4
5
Downloaded From TV-Manual.com Manuals
Network
If One Foot Connection
on the screen notifying you of the failure. If you want to try using
reset the wireless router, and then try again from Step 1. You can also choose one of the other
connection setup methods.
The network connection screen appears, and network setup is done.
Place the wireless router in a desired location.
If the wireless router's settings change or you install a new wireless router, you must perform the
One Foot Connection
Priority QOS makes your product faster by giving it priority bandwidth. (Priority QOS is optional.
You can turn it on and off.)
Because your Samsung product has a priority connection, you can enjoy HD content without
buffering.
The connection speed may vary based on the network environment.
AllShare
Go to Network Settings screen.
Select Wireless (General), and press [
Select Ad hoc. The message
compatible devices like a cell phone or PC. Other network services may be limited. Do you
want to change the network
Select OK, and press [
When the product finishes searching for your mobile device, input the generated
(SSID) and Security Key into the device you want to connect and then connect to the network
If network does not operate normally, check the Network Name (SSID) and Security key

again. An incorrect Security key may cause a malfunction.
does not connect your product to your Router, a pop- up screen appears
procedure again, beginning from Step 1.
or Media function.
], then press [
"Ad hoc service supports a direct connection with Wi-Fi
connection?" is displayed.
]. The product searches for the mobile device.
One Foot Connection
] again.
Network Name
7 Network
again,
137