Magicinfo Lite Settings - Samsung ME40A User Manual

7

Using the Media Function
An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile
phone will be displayed on your product. The contents are played automatically 3 seconds after the alarm
window appears. If you press the
contents are not played.
7.4

MagicInfo Lite Settings

O
1
2
Downloaded From TV-Manual.com Manuals
Network
Delete: Deletes the devices from the list.
This function only deletes the name of the device from the list. If the deleted device is turned on or
tries to connect to the product, it may appear on the list again.
The first time a device accesses your product through the media function, a warning popup

window appears. Press the [
product freely and use the
To turn off media contents transmissions from a mobile phone, set

Settings.
Contents may not play on your product depending on their resolution and format.

The [ ] and /

Using the mobile device, you can control the media play. For details, refer to each mobile's user's

guide.
m
MENU Network
Server
Setting the MagicInfo Lite

Enter the server IP address and port number.

Use 7001 as the port number.

If unable to connect to the server using port number 7001, check with your server
administrator to find the correct port number and then change the port number.
FTP Mode

Select an FTP operating mode:

Default Storage

Specify the default memory to save schedules or content sent from the server to.

If the default storage space is set to USB, a schedule will not run if a USB device is not

connected.
Send a notification message to the server when internal memory is used up.

Storage
RETURN or EXIT button when the alarm window appears, the media
] button to select Allow. This permits the phone to access the
Media function to play content.
buttons may not work depending on the type of media content.
MagicInfo Lite Settings
server IP
Active or Passive.
Media to Off
ENTER[ ]
7 Network
in the AllShare
139