Wolf Warming Drawer Use & Care - Wolf ICBWWD30 Use & Care Information Manual

W O L F
C O N T R O L P A N E L
The Wolf warming drawer has three options for
control panel backlighting; backlight off in
Sabbath, backlight on in Sabbath and backlight
off in all modes. The backlight defaults to ON in
normal use and OFF in Sabbath Mode.
To Change Control Panel Backlighting:
Warming drawer must be OFF .
Touch and hold temperature,
and
current backlight setting will appear in the
display.
Use the
three backlight options; backlight off
in Sabbath, backlight on in Sabbath
(50% power), and backlight off in all
modes. A selection should be made within
30 seconds. The unit will default to the
current backlight setting if a new selection
is not made within this time.
With the desired backlight setting selected,
touch
12
WA R M I N G D R AW E R
B A C K L I G H T I N G
arrow for 5 seconds. The
arrow to scroll through the
to save the setting.
U S E & C A R E
T E M P E R AT U R E
The warming drawer temperature display can
be changed from Fahrenheit (F) to Celsius (C)
or vice versa.
To Change Temperature Display:
Warming drawer must be OFF .
Touch and hold both the temperature,
and
After 5 seconds, the unit will beep, the
arrow
backlighting will turn on, and either F or C
will appear, depending on the current
display setting.
Touch the temperature,
arrow to select either Fahrenheit (F) or
Celsius (C).
With the desired temperature display
selected, touch
B E F O R E U S I N G F O R T H E
T I M E
Remove all literature and packaging
materials from inside the warming drawer.
Clean your warming drawer thoroughly
with hot water and a mild detergent. Rinse
and dry with a soft cloth. This removes
residual oil and grease left on the surface
from the manufacturing process.
Apply a stainless steel polish to protect the
finish and add luster to the exterior of your
warming drawer. Refer to Care Recommen-
dations on page 14.
D I S P L AY
arrows for 5 seconds.
or
to save the setting.
F I R S T