Wolf ICBWWD30 Use & Care Information Manual page 15

W O L F T R O U B L E S H O OT I N G
G U I D E
T R O U B L E S H O OT I N G
P R O B L E M
Warming drawer
does not operate
Warming drawer
does not slide smoothly
Excessive condensation
No heat in the
proof setting
Food dries out in the
proof setting
G U I D E
P O S S I B L E S O L U T I O N
A fuse may be blown or the circuit breaker tripped. Replace the
fuse or reset the circuit breaker.
Warming drawer may not be plugged in. Plug it in.
Ball bearings are out of alignment. Fully extend the drawer and
close completely to realign.
Warming drawer is overloaded or the load is unbalanced. Reduce
weight to less than 34 kg or redistribute contents.
Liquid is in the warming drawer pan. Remove the liquid.
Foods are uncovered. Cover food with a lid or aluminum foil.
Temperature setting is too high. Reduce the temperature setting.
Room temperature may prevent the thermostat from turning on.
Verify that PROOF is illuminated in the display on the control
panel.
Cover food with a lid or aluminum foil.
C O N TA C T
I N F O R M AT I O N
Website:
wolfappliance.com
15