Warming Drawer Features; Warming Drawer Use & Care - Wolf ICBWWD30 Use & Care Manual

Warming Drawer Features

Warming Drawer Features
• Optional stainless steel drawer fronts with handle
match the look of Wolf built-in ovens and sealed burner
rangetops.
• Optional integrated drawer front allows for custom
wood panel and handle.
• 850-watt heating element.
• Hidden electronic touch control panel.
• Preset and variable temperature control.
• Preset automatic shut-off or extended operation in
Sabbath mode.
• Removable rack for stacking food.
MODEL ICBWWD30
Removable stainless
steel drawer pan
Galvanized exterior
Ball bearing
drawer glides
Location of
rating plate
• Removable stainless steel drawer pan.
• Full-extension, ball bearing drawer glides.
• Stainless steel interior with galvanized exterior.
• Optional six-piece container set with lids and rack
available as an accessory.
• CE certified.
This appliance is certified by Star-K to meet
strict religious regulations in conjunction with
specific instructions found on www.star-k.org.
Removable rack
for stacking food
Stainless steel
interior
Hidden electronic
touch control panel
Warming Drawer Use & Care
Electronic Controls
The electronic touch control panel is hidden when the
warming drawer is closed. With the warming drawer open,
the controls can be accessed at the top of the drawer just
behind the drawer front.
PRESETS
Your warming drawer features four preset temperature
settings; , , and . Using the PRESETS
eliminates the need to manually set the temperature and
time.
Preset Temperature Settings
TO SET THE TEMPERATURE:
1) Touch .
2) Touch one of the PRESETS; , ,
or touch the or arrow pad. Touch the
arrow to increase the temperature and the
arrow to decrease the temperature. Two seconds after
selecting the temperature/time, the ON indicator will
illuminate as well as a beep indicating that the unit is
on.
IMPORTANT NOTE: One of the PRESETS or the
arrow pad must be pressed within 20 seconds of
turning unit on, or the unit will automatically shut off.
LCD Display ON/OFF
control
Warming drawer control panel.
PREHEAT
During preheat, the temperature read-out in the LCD
display alternates between the setpoint and the actual
temperature. The word "Lo" will appear in the LCD display
until the temperature reaches 29°C. The unit will beep
once to signal preheat is complete.
AUTOMATIC SHUT-OFF
Your Wolf warming drawer has a factory preset automatic
shut-off time of four hours. The time interval of the auto-
matic shut-off can be adjusted from one minute to 24
hours.
29°C
48°C
TO SET AUTOMATIC SHUT-OFF:
71°C
93°C
1) Warming drawer must be OFF.
2) Touch .
3) Touch one of the PRESETS; ,
or touch the or arrow pad. Touch the
arrow to increase the temperature and the
or
arrow to decrease the temperature.
4) Touch and hold the arrow to increase the shut-
off time or the arrow to decrease the
shut-off time.
5) The word TIMER will illuminate and the automatic
shut-off time will appear in the LCD display.
or
Variable Preset
temperature temperature shut-off timer
controls controls
(UP and DOWN) (UP and DOWN)
6
, or
Automatic
adjustment