Model Number ICBWWD30 • Model ICBWWD30 must be installed with a Wolf stain- • Minimum 19 mm thick lumber for the solid platform Read this entire installation guide prior to installation and less steel or integrated drawer front. Make sure you that supports the warming drawer—must be able to...
COMBINATION INSTALLATIONS OVERALL DIMENSIONS with a Wolf stainless steel or integrated drawer front. • Model ICBWWD30 must be installed with a Wolf stain- • Model ICBWWD30 may be installed in combination less steel or integrated drawer front. Specific installa- with a Wolf built-in oven and/or microwave. Additional An E Series or Pro drawer front with handle is recom- tion instructions are included with the drawer front.
Warming Drawer Installation wolfappliance.com ICBWWD30 with E or L Series Drawer Front ICBWWD30 with Pro Drawer Front UNDERCOUNTER INSTALLATION INSTALLATION WITH SEALED BURNER RANGETOP 51 mm 51 mm DIMENSION COOKING SURFACE ANTI-TIP BLOCK WILL VARY* 914 mm RANGETOP OPENING WIDTH...
Page 6
Warming Drawer Installation Integrated Drawer Front Anti-Tip Block Install the Warming Drawer Unpack the warming drawer on a flat surface. Remove all INSTALL RECESSED CLEATS AND PLATFORM INSTALL ANTI-TIP BLOCKING Integrated Drawer Front packaging materials from inside the warming drawer. Do For an overlay or flush inset application, you will need to DRAWER FRONT Install a 51 mm x 51 mm or 51 mm x 102 mm anti-tip...