Operation; Control Description; Turning The Power On/Off - Furuno NX-300-D Operator's Manual

2.1 Control Description

All operation of the NX-300 is carried out with the controls on the front panel of the display unit.
FURUNO
MENU
DISP

2.2 Turning the Power On/Off

Turning on: Press the [PWR] key.
To confirm version number of the equipment, press the [PWR] key a little longer. Release the
key when the following window appears.
Turning off: Press the [PWR] key for 3 seconds.
Note: The NX-300 should be turned on for the duration of a voyage so that important warning
messages will not be missed.
ENT
Opens menu or
DIM
message display.
PWR
Opens message
selecting display
or navigational
data display.
Figure 2-1 Control panel
Figure 2-2 TURNING ON window
Figure 2-3 TURNING OFF window

2. OPERATION

ENT
MENU
DISP DIM
FREQ
PWR
XX-Version no.
Omnipad
• Shifts cursor and display.
• Selects items on menus.
Registers items on menus.
Adjusts panel dimmer
and contrast.
Selects 518 kHz or 490 kHz.
(See page 2-12.)
Long press: Turns power off.
Touch and release: Turns power on.
2-1