Adjusting Dimmer And Contrast; Menu Operation Overview - Furuno NX-300-D Operator's Manual

2.3

Adjusting Dimmer and Contrast

1. Press the [DIM] key to show the dimmer and contrast setting window.
2. Press ! or " for best illumination of the control panel and LCD.
3. Press # or $ for best contrast of the LCD.
4. Press the [ENT] key to close the dimmer and contrast setting window.
Note: If you turn off the power with contrast less than 36, contrast is automatically set to 36 when
you turn on the power again.
2.4

Menu Operation Overview

The menu allows you to custom tailor the NX-300 according to your needs. You can select which
categories of message you wish to receive, specify which data to display, etc.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select menu item. As you operate ! or ", the selected item appears in
reverse video. For example, select FUNCTIONS.
3. Press the [ENT] key to open menu selected.
2-2
Figure 2-4 DIMMER and CONTRAST setting window
Figure 2-5 Main menu
Figure 2-6 FUNCTIONS menu