Time Display; Default Setting - Furuno NX-300-D Operator's Manual

3.3 Time Display

When navigational data is fed to the NX-300, you may display the time in 12-hour or 24-hour
notation. The default setting is 24-hour notation. AM or PM is shown when 12-hour notation is
selected.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select SYSTEM MENU.
3. Press the [ENT] key. The SYSTEM MENU appears.
4. Press " to select TIME DISP.
5. Press the [ENT] key. The following window appears.
6. Press ! or " to select 12HOUR or 24HOUR as appropriate.
7. Press the [ENT] key.
8. Press the [MENU] key or [DISP] key to close the SYSTEM MENU.
3.4

Default Setting

This function restores all default settings.
1. Press the [MENU] key to open the main menu.
2. Press ! or " to select SYSTEM MENU.
3. Press the [ENT] key to show the SYSTEM MENU.
4. Press " to select DEFAULT SETTING.
5. Press the [ENT] key. The following window appears.
6. Press # to select YES. If you want to cancel, press the [ENT] key to select NO before
pressing #.
7. Press the [ENT] key.
8. Press the [MENU] key or [DISP] key to close the SYSTEM MENU.
Figure 3-4 TIME DISP window
Figure 3-5 DEFAULT SETTING window
3-3