Daikin BRC1D71 Operation Manual page 17

If the action and the corresponding time are correct,
you can proceed to the second schedule timer action.
This is done by pressing the FUNCTION button, the
data is saved and the next schedule timer action can
be programmed.
Programming the remaining schedule timer actions
for the same day is similar.
You can browse the schedule timer actions by
pressing the FUNCTION button.
NOTE Don't worry
schedule timer actions by pressing the
FUNCTION button repeatedly, they can
be deleted when finishing the current day.
When all data for the schedule timer actions for
Monday are entered,
programmed actions.
Make sure the last schedule timer action you want to
keep is selected (schedule timer actions with a higher
number will be deleted).
Now you must choose between 2 options:
1 CONFIRM AND COPY TO NEXT DAY
The schedule timer action programmed for the
current day are also valid for the next day: use
the "confirm last action and copy actions to next
day" function by pressing the FUNCTION and
SETBACK buttons simultaneously for 5 seconds.
2 CONFIRM ONLY
The schedule timer action programmed for the
current day are only valid for the selected day:
use the "confirm last action and go to next day"
function by pressing the FUNCTION button for 5
seconds.
Operation manual
13
if you add additional
you must confirm the
Program mode is quit and depending on the choice
made, the programmed actions are saved for Monday
(and possibly Tuesday).
PROGRAMMING THE OTHER DAYS OF THE WEEK
Programming the other days of the week is identical
to programming the first day of the week.
blinking to indicate the selected day,
steady if actions were copied from Monday to
Tuesday, only is displayed if no actions were
copied from Monday to Tuesday.
2 I WANT TO EDIT PROGRAMMED ACTIONS
Editing programmed actions is easy.
Make sure you are not in program mode (
blinking); if required, press the SCHEDULE button to
quit program mode.
Browse to the programmed actions using the
FUNCTION button, select the day and action you
want to edit.
Press the FUNCTION button for 5 seconds; program
mode is enabled, the
blinking.
Edit the settings using the same buttons described
above.
Select the "last action" using the FUNCTION button
and decide if you do or do not want to copy the
programmed action(s) to the next day (pressing the
FUNCTION and SETBACK buttons simultaneously or
only the FUNCTION button for 5 seconds).
and
icon and selected action are
BRC1D71
Remote controller
3P166742-1
is
are
not