Daikin BRC1D71 Operation Manual page 14

The SCHEDULE button is used to exit browsing at
once (without having to scroll through all programmed
actions).
Press the FUNCTION button to enter the browse
mode, the icon appears,
NOTE Browsing always starts on Monday and
ends on Sunday.
Check the
programmed for Monday,
The clock indicates the time when the programmed
action is scheduled, either
and is being displayed.
NOTE The temperatures mentioned above are
for clarifying purposes only, temperature
values on your controller may vary.
If does not appear, it indicates that there are no
programmed actions for Monday.
Press the FUNCTION button again to go to the next
day of the week. will blink, this indicates that the
programmed actions for Tuesday are being browsed.
The process described above is now restarted.
If at least 1 action is programmed for Tuesday,
appear. The clock indicates the time when the
programmed action will be enabled, either
or and
If does not appear, it indicates that there are no
programmed actions for Tuesday.
Press the FUNCTION button to display the next
programmed action.
programmed for Tuesday,
will appear.
Assuming that 5 actions were programmed for
Tuesday, a total of 5 presses will be required to
display all programmed actions.
BRC1D71
Remote controller
3P166742-1
will blink.
icon. If at least 1 action is
will appear.
, or
is being displayed.
If a second action
will still be blinking and
Continue pressing the FUNCTION button until the
day of the week indicator displays the current day (not
blinking), you have now quit browsing.
NOTE The number of times that the FUNCTION
button will have to be pressed to quit
browsing depends on the number of
programmed actions in the schedule
timer.
How do I interpret the programmed
actions
To be able to understand the behaviour of your
installation when the schedule timer is enabled, it is
important to look at all programmed actions for the
current day and maybe the last programmed action of
yesterday.
If the first programmed action for today is not active
yet, the current status of your installation depends,
most probably but not necessarily, on the last
programmed action from yesterday. Read the
important note below.
If the first programmed action for today is already
active, the current status of your installation depends,
most probably but not necessarily, on the parameters
programmed in the first programmed action for today.
Read the important note below.
will
NOTE To keep the operation of your installation
simple, the schedule timer settings can
,
easily be overruled by altering the current
setting
previous command until next scheduled
command).
Conclusion: Although
is
might have altered
programmed action will overrule the altered settings
and all settings return as programmed.
("last command" overrules
is displayed, somebody
the settings. The
Operation manual
next
10