Daikin BRC1D71 Operation Manual page 12

ADDITIONAL FEATURES OF THE CONTROLLER
1 AWAY
Press the TIME
simultaneously to enable the AWAY function.
KEEP IN MIND THAT THE
BUTTON MUST BE OFF TO GUARANTEE
TRIGGERING OF THE AWAY FUNCTION.
Do not use the AWAY mode, in case of VRV
system.
2 Adjusting the air flow direction
Use the AIR FLOW DIRECTION button to adjust the
air flow direction. Press the button to switch between
fixed or variable air flow direction. Use the
to determine the fixed air flow direction by pressing
the AIR FLOW DIRECTION button when the
icon indicates the desired direction.
NOTE Even if fixed air flow direction is selected,
variable air flow direction can be enabled
automatically
operation of your installation.
3 SCHEDULE TIMER
All features and operation and programming of the
schedule timer are described below.
Schedule timer operation
In schedule timer operation, the installation is also
controlled by the schedule timer. The actions
programmed in the schedule timer will be executed
automatically.
The schedule timer always executes the last
command; this means the user can temporarily
overrule the last executed programmed action. Refer
to "Manual operation" on page 6. The next
BRC1D71
Remote controller
3P166742-1
and TIME buttons
icon
to preserve proper
programmed action (in the schedule timer) will return
control to the schedule timer.
Use the SCHEDULE button to enable or disable the
schedule timer.
NOTE
The schedule
button,
SCHEDULE button to enable or disable
the schedule timer. The schedule timer is
enabled when the
button
schedule timer until the next programmed
action.
The programmed schedule is time driven.
Make sure that the clock and day of the week
are set correctly. Refer to "CLOCK SETTING
FUNCTION" on page 5.
Manually adjust the clock for summertime
and wintertime. Refer to "CLOCK SETTING
FUNCTION" on page 5.
A power failure exceeding 1 hour will reset
the clock and the day of the week. Refer to
"CLOCK SETTING FUNCTION" on page 5
to adjust the clock and the day of the week.
The actions programmed in the schedule
timer will not be lost after a power failure;
reprogramming the schedule timer is not
required.
To set up the SCHEDULE TIMER refer to chapter 6.
"Programming the schedule timer" on page 11.
timer overrules the
only use the
icon is visible. The
only overrules the
Operation manual
8