Table of Contents
Advertisement
The automatic riding light
4
control system cannot re-
place your personal assessment
58
of lighting conditions. The sensor
cannot detect fog or drizzle, for
example.
In such situations the low beam
headlight must be switched on
manually, as otherwise a safety
risk would occur.
SETUP
In the
display, at the menu item
z
DLIGHT
set the automatic
daytime riding light to
The indicator light for the
automatic daytime riding
light illuminates.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B. in
a tunnel). If a sufficient ambi-
ent brightness is detected, the
daytime riding light is switched
on again. If the daytime riding
light is active, the daytime rid-
ing light symbol is displayed in
the multifunction display.
Manual operation of the
light when the automatic
system is switched on
If you press the button for
the daytime running light
the daytime running light is
switched off and the low-beam
menu of the
headlight and front side lights
are switched on (e. g. when
you ride into a tunnel, and the
ON
.
response of the automatic
daytime running light to the
change in ambient brightness
is delayed). The auxiliary
headlight switches on again
when the daytime running light
is switched off.
If you press the button again
the daytime running light is
reactivated, in other words
the daytime running light is
switched on again when am-
bient light is bright enough.
Turn indicators
Operating the turn
indicators
Switching on ignition (
Push button 1 to the left to
switch on the left turn indicat-
ors.
Push button 1 to the right to
switch on the right turn indicat-
ors.
Operate centre button 1 to
cancel the turn indicators.
44).
Advertisement
Table of Contents
