Setting The Clock; Setting The Date - BMW R 1200GS Adventure Rider's Manual

SETUP
In order to exit the
menu, at the menu item
SETUP EXIT
press and hold
button 1.
In order to cancel the
menu at any point, press but-
ton 2 and hold.

Setting the clock

Switching on ignition (
Attempting to set the clock
while riding the motorcycle
can lead to accidents.
Set the clock only when the mo-
torcycle is stationary.
SETUP
In the
the menu item
CLOCK
.
Keep button 2 pressed until
SETUP
the hours in the bottom display
line 3 start to flash.
––:––
If "
instead of the time, the
44).
voltage supply of the instrument
cluster has been interrupted (e.g.
by disconnecting the battery).
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
menu, select Keep button 2 pressed un-
SETUP
til the minutes in the bottom
display line 3 start to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the minutes no longer flash.
Setting is complete.
In order to cancel the setting
at any point, keep button 1
pressed until the initial value
is shown again.
completed, the setting will be
cancelled.
" is displayed

Setting the date

Switching on ignition (
In the
the menu item
DATE
If you drive off before
the setting has been
44).
SETUP
menu, select
SETUP
.
4
49
z