Table of Contents
Advertisement
7
120
Insert bulb 2, making sure that
tab 3 is correctly positioned.
The bulb might face in a
direction other than that
z
shown here.
Engage spring clip 1 in the
catch.
Install plug 1.
Place cover in position and fit
by turning clockwise.
Replacing bulb for parking
light
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1 by turning it
counter-clockwise.
Pull socket 1 out of the head-
light housing.
Advertisement
Table of Contents
