Laying Up The Motorcycle; Cycle; Protective Wax Coating; Restoring Motorcycle To Use - BMW R 1200GS Adventure Rider's Manual

otherwise be affected or become
9
discoloured. BMW Motorrad re-
commends using BMW vehicle
146
polish or BMW paint cleaner for
this purpose.
Marks on the paintwork are par-
ticularly easy to see after the
motorcycle has been washed.
Remove stains of this kind im-
z
mediately, using cleaning-grade
benzene or petroleum spirit on a
clean cloth or ball of cotton wool.
BMW Motorrad recommends us-
ing BMW tar remover for remov-
ing specks of tar. Remember to
wax the parts treated in this way.
Laying up the
motorcycle
Fill the motorcycle's fuel tank.
Clean the motorcycle.
Removing battery (
Spray the brake and clutch
lever pivots and the main and
side stand pivots with a suit-
able lubricant.
Coat bright metal and chrome-
plated parts with an acid-free
grease (e.g. Vaseline).
Stand the motorcycle in a dry
room in such a way that there
is no load on either wheel
(preferably using front-wheel
and rear-wheel stands from
BMW).

Protective wax coating

If water is no longer forming
beads on the paint surface, it
must be waxed.
BMW Motorrad recommends
applying only BMW car wax or
products containing carnauba
wax or synthetic wax.
Restoring motorcycle
127).
to use
Remove the protective wax
coating.
Clean the motorcycle.
Install a charged battery.
Before starting: work through
the checklist.