Motorola DCX3200-M P3 User Manual page 53

Troubleshooting
Problem
There are black bars
to the right and left of
the picture
There are black bars
above and below the
picture
There are black bars
on all four sides of
the picture
Colors do not appear
correctly
High-Definition Digital STB DCX3200-M P3 • User Guide
365-095-17389-x.1
Wide screen TVs display 4:3 programs in this format unless set to Stretch. Turn on
the 4:3 OVERRIDE feature in the User Settings menu. This enables most wide
screen TVs to stretch the video to fill the screen (see your TV manual for
information about stretching 4:3 video).
• If the DCX set-top is connected to a wide screen TV, verify that the TV TYPE is
set to 16:9 in the User Settings menu.
Many HD programs are broadcast in pillar-box format with black bars to the left
and right of the picture. These programs are broadcast in 16:9 HD formats even
though the video is not 16:9.
All 4:3 HDTVs display HD programs in letterbox format (black bars above and
below the picture) because of the shape of the display screen.
• Turn on the 4:3 OVERRIDE feature in the User Settings menu. This enables
most standard screen TVs to display a full screen picture when the DCX set-top
is tuned to a 4:3 program.
• Set the TV TYPE to 4:3 Pan-Scan. This enables the DCX set-top to remove the
black bars above and below the picture when possible.
Some SD programs are broadcast in the letterbox format with black bars above
and below the picture. Some widescreen TVs offer a zoom feature that may be
able to remove the black bars (see your TV manual for information about zooming
4:3 video).
This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF. To set 4:3 SD
programming to fill the screen, depending on the capabilities of the TV, set
4:3 OVERRIDE to 480i or 480p.
This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox
format. To confirm, wait for a commercial or look for a graphic, such as a network
logo. If the commercial fills the screen from top to bottom, or the graphic appears
below the active video, the program is being letterboxed by the broadcaster. You
can minimize this by activating the zoom feature on the TV.
A broadcaster may include black bars on either side of a wide screen broadcast.
This is called a "hybrid" aspect ratio and results in a black border surrounding the
video on a 4:3 TV. Because this is part of the broadcast, the DCX set-top cannot
correct the video. You may be able to minimize the border using the zoom feature
on the TV.
Be sure to match up each signal to the same YPbPr connection on the TV,
otherwise the colors will not appear correctly on your TV.
Possible Solution
B
46