Table of Contents
Advertisement
5.3 Setup
Use this sub-menu to select general dome configuration settings as below:
5.3.1 Enter date/time
Use UP, DOWN, LEFT and RIGHT to set the date and time.
The format is DD/MM/YY HH:MM:SS.
Move cursor LEFT to exit.
5.3.2 Daylight Saving
Default setting is AUTO which is suitable for use in Europe. Alternatively set to WINTER for
no time change, or to SUMMER to advance the displayed time by one hour.
5.3.3 Language
The language used in the menu and for other messages is selected here.
5.3.4 Display
5.3.4.1
Date/Time Position
The position on the screen of the date and time may be set here using UP and DOWN. It
may also be set to OFF (default) so that it is not displayed.
5.3.4.2
Camera Title
A title for the dome camera may be entered if required using UP, DOWN, LEFT and RIGHT.
Move cursor LEFT to exit.
The position on the screen of the title may be set here using UP and DOWN. It may also be
set to OFF so that it is not displayed.
5.3.4.3
Show Preset During Tours
This option determines whether or not the preset titles are displayed while a tour is in
progress.
5.3.4.4
Preset Text Position
This option specifies where the preset title is displayed when a preset is called. Default is
Bottom-Left.
5.3.4.5
Text Background
The displayed text may be given a black background if required to make it stand out more.
5.3.5 Passwords
5.3.5.1
Installer
The default password 333300 may be changed if required. Take care to make a note of the
new password.
5.3.5.2
Supervisor
The default password 222200 may be changed if required. Take care to make a note of the
new password.
Page 25
Advertisement
Table of Contents
