Table of Contents
Advertisement
To create a camera title, move joystick/arrow key RIGHT to enter 'input' mode. Move
joystick/arrow keys UP/DOWN to select alphanumeric characters.
Move joystick/arrow keys LEFT to save & exit menu.
5.7.3 Preset Speed
The speed at which the dome moves to a preset is set here. The default setting is 60% of
full speed.
5.8 Tours
Tours are sequences of up to 100 presets that the dome moves between automatically,
dwelling for a period at each. The tour is repeated until interrupted by:
•
Manual pan, tilt or zoom
•
Calling up a preset
•
An alarm
5.8.1.1
Tour 1 (to Tour 8)
5.8.1.1.1
Title
If you want a title to be displayed when you select a tour, enter it here. Otherwise the default
T1, T2, T3 etc will be displayed.
5.8.1.1.2
Initialise Tour
Use this option to initialise a tour as follows:
•
Set
Fill the tour with presets. Presets that are not set will be ignored. As more
presets are programmed, they will automatically be included in the tour.
•
Clear
Clear the tour of all presets
•
Cancel Use LEFT to exit without changing the tour
5.8.1.1.3
Edit Tour
Each position of the tour may be edited using this option. Any positions set to "No Preset"
will be ignored when the tour I running.
5.8.1.1.4
Dwell
This is the time in seconds between each preset being selected when the tour is running.
5.8.1.1.5
Speed
This is the speed at which the dome goes to the presets that are called up during a tour.
Page 31
Advertisement
Table of Contents
