5 Menus
5.1 Menu Navigation
5.1.1 Entering Menu
Different keyboards have different ways of entering the menu system of a dome. Refer to
specific keyboard manual for details.
Common examples are:
•
Videoswitch Vi-K2
•
Videoswitch Vi-K3
•
BBV (TX400)
•
Pelco (KBD300A)
•
DS2
5.1.2 Moving cursor
Once in the menu, the joystick may be used for LEFT, RIGHT, UP and DOWN control of the
cursor. On a Videoswitch keyboard, the cursor keys can be used which is more convenient.
•
UP
•
DOWN
•
RIGHT
•
LEFT
5.1.3 Select
Where a select key is required (eg setting a preset from within the menu) this is also
dependent on keyboard type.
Common examples are:
•
Videoswitch Vi-K2
•
Videoswitch Vi-K3
•
BBV (TX400)
•
Pelco (KBD300A)
•
DS2
5.1.4 Cancel
Where a cancel key is required (eg cancelling the setting of a preset from within the menu)
this is also dependent on keyboard type.
Common examples are:
•
Videoswitch Vi-K2
•
Videoswitch Vi-K3
Page 23
Press DOME then press MENU
Press and hold ALT then press DOME MENU
Press and hold SHIFT then press 1
Enter 95 then press and hold PRESET key
Press and hold * 8,8,910,10,2
move the cursor up, or change a value
move the cursor down, or change a value
move the cursor right, or enter a sub-menu
move the cursor left, or exit a sub-menu. When editing a
title, you may need to go LEFT several times to exit
-
Press OK
-
Press OK
-
Press 1
-
Enter 96 then press and hold PRESET key
Press Preset,10, then preset number e.g.1,2
-
Press WASH
-
Press ALT and ESC