Bosch 7 620 320 029 Operating Instructions Manual page 19

Settings
Cascading
Note:
You can extend the range of the WLAN network
by cascading a number of devices.
f Choose the Settings/Cascading menu item.
You will find these settings in the Cascading menu:
Enable Cascading
f
Set whether cascading is active or inactive here.
Cascading Role
f
Set whether the device is to operate as a base
station (Master) or repeater (Slave) here.
System settings
f Choose the Settings/System menu item.
You will find these settings in the Systemeinstellungen
menu:
New password / Repeat password
f
Enter a new password here for access to the Setting
menu, or to the entire user interface (see next
point).
The password set at the factory is "admin".
Password protection
f
Set here whether the password protection is only to
apply to the Settings menu (option: Settings only)
Robert Bosch Car Multimedia GmbH
or to the entire user interface of the device (option
All pages).
Shut-off delay
f
Enter how long the device should remain switched
on and active after the vehicle ignition has been
switched off here.
Homepage
f
Specify the start page for the user interface here
(option: Overview or Position).
Theft protection by email / SMS
f
You can activate or deactivate theft protection by
email or SMS here. If theft protection is active, then
an email or a text message with the position of the
device is sent every time it is switched on or off.
Enter the email address or telephone number to
which the messages should be sent when you
activate theft protection.
Reset device
f
You can restart the device here (option: System
reset; all settings are retained), or you can reset the
firmware of the device (option: Factory reset; all
settings are returned to the factory settings).
Device software update
f Choose the Settings/Update menu item.
Automatical
f
Click Check for update to see whether updated
software for the device is available on the update
server. If so, you can download the update directly
onto the device.
Manual
f
If an update file is saved on a computer connected
to the device, click Select file ... to select the
update file, then Upload in order to install the new
software.
en | 19
7 620 320 029 | 09.2014