Bosch Mastertech M-VCI Installation Manual
Bosch Mastertech M-VCI Installation Manual

Bosch Mastertech M-VCI Installation Manual

Mastertech m-vci – netgear router
Hide thumbs Also See for Mastertech M-VCI:

Advertisement

Quick Links

Mastertech M-VCI – NETGEAR
Router
®
Installation Guide

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Bosch Mastertech M-VCI

  • Page 1 Mastertech M-VCI – NETGEAR Router ® Installation Guide...
  • Page 3: Table Of Contents

    Appendix C – Configured Router Information 15-16 Appendix D – Multi Routers Information Please note: The Mastertech VCI is referred to as “M-VCI” within this guide. M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 4: Getting Started (Read Me First)

    The router configuration with your specific situation. In files need to be downloaded from these cases, you should contact the Bosch diagnostics website and your network IT specialist for saved to your PC. Saving them in a assistance. New Folder within My Documents is recommended.
  • Page 5 Static or Dynamic IP addressing. address” on a network. Every Refer to Appendix A for additional device on a network must have information. an IP address, this includes M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 6 Setup type and Special a wireless or stand alone PC, Instructions connect the new NETGEAR Router to your PC LAN port with the provided Ethernet cable. Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 7 Instructions for Type III” The M-VCI – NETGEAR Router install procedure is similar for all types. When a “Special Instruction” is called out, please M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 8: Installation Steps

    Disconnect all wired network connections f Connect the router to the computer LAN port Note: The router does not need internet connection at this time. Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 9 Step 1 - NETGEAR Router f Wait for the progress bar to Configuration (For: Types I, indicate completion of the II & III) (Router Navigation) restoration. M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 10 Connected f Provide AC power to the NETGEAR Router You are now finished with Step 2, proceed to Step 3. Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 11: Mac Address

    Click: Apply f Wait for the router to apply settings Caution! Do not connect the router to the cable/DSLmodem at this time. M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 12: Step 2 - Connecting Your Wired Devices

    – WPA Personal TKIP devices to PC (If required) – Passphrase = Bosch_ VCI_800-321-4889 You are now finished with Step 2, proceed to Step 3. Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 13 Connect M-VCI to the computer via USB f Open Shop Foreman Pro f Click: M-VCI icon at the top of the screen f Click: VCI Setup M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 14: Network Settings

    Step 4 – Setting up your M-VCI (Applies to Types I, II & III) (Configuring Wired Ethernet Settings) While in Network Setup: f Click: Wired Ethernet Tab Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 15: Wireless Encryption

    Step 4 – Setting up your M-VCI (Applies to Types I, II & III) (Setting the Wireless Encryption) f Verify: Network Authentication M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 16 Confirm Wireless SSID f Confirm Wireless IP f If IP says “Not Set”, click Refresh f Ready to Use f Close the VCI Manager Robert Bosch LLC M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011...
  • Page 17: Appendices | 14

    USB cable f If you suspect the “WPS” button on the version 10 router was pressed then reinstall the Bosch configuration file into M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 18: Router Information

    255.255.255.252 f Verify firewall and security f Type II & III settings on the computer – IP: 192.168.10.1 f Verify the Bosch Router Wireless Network is set to the – Subnet Mask: 255.255.255.0 – highest priority Router login information (after initial configuration): –...
  • Page 19 Please consult Appendix C and the and in any PC using the access NETGEAR router documentation. point. Most PC wireless interface software supports the M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011 Robert Bosch LLC...
  • Page 20 2040 Alameda Padre Serra, Ste 220 Santa Barbara, CA 93103 Toll Free: 800-321-4889 Fax: 805-966-9540 www.boschdiagnostics.com BOSCH is a trademark licensed by Robert Bosch GmbH and/or its affiliated entities. © 2009 Robert Bosch LLC, USA. All rights reserved. 2213461 0411 F00E900290...

Table of Contents