Audio Setup - Daewoo DV–6T834B Owner's Manual

AUDIO S
I To set the DVD+VCR to match the capabilities of your audio system:
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
50
ETUP
While in Stop mode, press
1
[SETUP].
Selecting DIGITAL OUT.
2
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes to the digital audio
output.
Select a Dynamic Range
3
You can set the Dynamic Range as
follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
DIGITAL OUT BITSTREAM
DYNAMIC RANGE OFF

DIGITAL OUT BITSTREAM
DYNAMIC RANGE LPCM
DIGITAL OUT
DYNAMIC RANGE FULL

OFF