Vcr Playback - Daewoo DV–6T834B Owner's Manual

VCR P
If the VCR detects
contaminated
head(s), it shows an
on-screen message
to bring this to your
attention.
* If you see this
message, clean the
video heads with a
commercial head-
cleaner.
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
22
LAYBACK
Press [POWER√] to turn on the DVD/VCR.
1
Press [VCR] to select VCR mode.
Insert the desired tape.
2
To start playback, press [PLAY].
3
If the picture is flickering or poor quality, adjust it with the [TRACKING
+/–] buttons.
To stop playback, press [ ].
4
To pause playback, press [PLAY].
Press [PLAY] again to resume playback.
Press [EJECT] on the unit or [OPEN/CLOSE] on the remote
5
control to eject the tape.
Various Playback Methods
I For fast forward (or reverse) playback, press [√√] (or [œœ ]) in Playback
mode.
I For slow-motion playback, pause the playback, then press [√√].
* NOTE: The VCR does not have Slow Reverse Playback.
I For Frame Advance, pause the playback, then press [∞]. Each time you
press this button, the picture advances one frame.
I For Still picture, press [PLAY] in Playback mode.
To Adjust Display
This product includes automatic Tracking so you can enjoy a clear picture
without additional operation. However:
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of the screen in slow playback
mode,
- If paused picture vibrates up and down.
Then try using the [TRACKING +/–] buttons to adjust the display manually.