Daewoo DV–6T834B Owner's Manual page 26

To Delete Channels Manually
I To delete memorized channels:
Selecting cable or antenna viewing
I This feature is useful if your cable signal goes out because it allows you to switch to a regular
antenna for alternate television reception.
To Set Cable Box
I This feature is useful if your cable signal goes out. It allows you to switch to a regular antenna for
alternate television reception.
To Set Output Channel
I Use this option to change the VCR 's output channel.The default is channel 3.
Downloaded From DvDPlayer-Manual.com Daewoo Manuals
1
Press [VCR], then press [SETUP] and select
"CHANNEL SET". Select "Add/Remove
Channels".
2
Select the desired channel and delete it.
Use the [0-9] buttons to select the desired channel to delete.
When [œ ] is pressed, "ADDED" under the channel number changes to
"REMOVED".
3
To check the deleted channel, press [CH+/–] on the remote control.
To set the signal type:
Press [ENTER] to toggle the setting between CABLE
and ANTENNA in the CHANNEL SET screen.
When the desired signal type is displayed, press
[SETUP] twice to exit.
Press [VCR], then press [SETUP] and
1
select "CHANNEL SET".
Select "Cable Box Setup".
Select "Cable Box Channel".
2
Enter the channel number which matches
to the output of the Cable Box.
Press [VCR], then press [SETUP] and select
"CHANNEL SET". Select "Channel
Change" (or "RF Output").
Press [ENTER] to set the RF Output channel to
CH3 or CH4.
M TV C
EMORIZING HANNELS
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
Cable Box Setup
Channel Change:
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
Cable Box Setup
Channel Change:
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4 or video)
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type:
Cable Box Setup
Channel Change:
(RF Output)
CABLE
CH3
CABLE
CH3
CABLE
CH3
25