Table of Contents
Advertisement
OPERATING CONTROLS
9. Heat Chamber Handle
8. Manual Shutoff
7. Fuel Gauge
1. Safety Guard:
2. Heat Chamber:
3. Wick Adjuster Knob:
4. Wick Life Extender:
5. Igniter Lever:
6. Fuel Tank Cap:
7. Fuel Gauge:
8. Manual Shutoff:
9. Heat Chamber Handle: Used to check and insure proper seating of the heat chamber after ignition.
AND FEATURES
Prevents direct touch on the heat chamber, greatly reducing the possibility of
accidental contact burns to the heat chamber.
Permits adjustment of heat output without increasing unwanted combustion
materials or reducing combustion efficiency. This feature increases comfort and
convenience while maximizing fuel savings.
Used to raise and lower wick for heat output adjustment. To extinguish flame
turn knob counterclockwise.
Helps maintain good wick performance.
Battery-powered electrical igniter is brought in contact with to ignite fuel at start-up.
NOTE: Lever should be pushed down gently.
Covers filling port of fuel tank.
NOTE: Wipe away any spilled kerosene (paraffin) from tank after filling.
Indicates fuel level in tank.
NOTE: Never fill beyond black line.
Used to rapidly retract wick and extinguish flame.
NOTE: To avoid odor and smoke, do not use routinely to turn heater off. This
manual shutoff is not effective when gasoline (petrol), gasoline (petrol)-
contaminated kerosene (paraffin), or other highly flammable fuels are
used in the heater.
lmproper seating of the heat chamber will cause erratic flame and smoke.
1. Safety Guard
2. Heat Chamber
3 . Wick Adjuster Knob
5. Igniter Lever
6. Fuel Tank Cap
4
4 . Wick Life Extender
Advertisement
Table of Contents
