Ignition Lock, With 4 Switch Position; Ignition Lock With 3 Switch Position; Combination Switch; Emergency Off Button - KTM 640 DUKE II 2001 Owner's Handbook Manual

6
3
3
4
8
Ignition lock with 4 switch positions
Switch positions of ignition lock
Ignition off, light off (engine can't be started)
Ignition on, light off (engine can be started)
Ignition on, light on (engine can be started)
1
Ignition off, light off, handlebar blocked
To switch the ignition to position
lock. Turn the handlebar all the way to the left, then turn the ignition
key to the left.
The ignition key can be withdrawn in position
Ignition lock with 3 switch positions
Switch positions of ignition lock
Ignition off, light off (engine can't be started)
Ignition on, light on (engine can be started)
Ignition off, light off, handlebar blocked
2
To switch the ignition to position
the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position
6

Combination switch

The rocker switch LIGHTS
= High-beam light
= Low-beam light
The indicator switch
Press flasher switch towards switch housing to switch off the flasher.
The horn is sounded with button
The light signal (high beam) is actuated with button
5

Emergency OFF button

The red emergency-OFF button
throttle grip. To turn off the engine, push the button until the engine
comes to a standstill.
7
Pushing of the black starter button
A
LWAYS VERIFY THAT THE TRANSMISSION HAS BEEN SET TO IDLE
ACTUATING THE STARTER BUTTON
ENGAGED
1
:
and firmly press it into the
2
:
and firmly press it into the lock. Turn the handlebar all the way to
3
actuates the high beam or low beam.
4
returns to central position after actuation.
WARNING
. I
F YOU START THE MOTORCYCLE WITH A GEAR
,
THE MOTORCYCLE WILL MOVE FORWARD
turn the ignition key to position
and .
turn the ignition key to position
and .
5
.
6
.
7
is arranged adjacent to the
8
actuates the E-starter.
( )
NEUTRAL
.
BEFORE