Table of Contents
Advertisement
1
2
C
6
Hand brake lever
The hand brake lever
basic position of the handbrake lever can be changed in 4 steps
(see Maintenance work on chassis and engine).
Speedometer
The mileage indicator
A
The day mileage indicator
Turn the setting wheel forward until only zeros can be seen in the display.
B
Tachometer
The tachometer
Do not push the engine into the orange zone, which begins at 8500 rpm.
3
Indicator lamps
The green indicator lamp flashes when the flasher light is working in
the same rhythm as the flasher light. Faster flashing of the flasher
control lamp indicates a defect bulb
The blue indicator lamp lights up when the high beam is on.
The green indicator lamp lights up when the neutral gear is selected
The red cooling liquid temperature warning lamp lights up as soon
as the cooling liquid has reached a temperature of approximately
110° C (230° F).
Ignition lock with 3 switch positions
Switch positions of ignition lock
Ignition off, (engine can't be started)
Ignition on, (engine can be started)
Ignition off, handlebar blocked
To switch the ignition to position
4
and firmly press it into the lock. Turn the handlebar all the way to
the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position
1
is mounted on the right side of the handlebar.The
A
in the speedometer
B
can be set to 0 by means of the setting wheel
3
shows the engine speed in revolutions per minute (rpm).
4
:
turn the ignition key to position
2
indicates overall mileage.
C
.
and
.
Advertisement
Table of Contents
