Hand Brake Lever; Choke Lever; Ignition Lock With 3 Switch Positions - KTM 640 LC4 ADVENTURE 2003 Owner's Manual

2
6
1
B

Hand brake lever

1
The hand brake lever is mounted on the handlebar on the right and
actuates the front wheel brake.The adjusting screw
original position of the hand brake lever (see maintenance work on chassis
and engine).

Choke lever

2
If the choke lever is pulled backwards, a bore will be opened in the car-
buretor through which the engine may draw in additional fuel. This produ-
ces a „rich" fuel/air mixture necessary for cold start. If the choke lever is
pushed forward up to the stop, the bore will be closed again. In this posi-
tion the choke cable must have a play of approx. 2 mm.

Ignition lock with 3 switch positions

Switch positions of ignition lock
Ignition off, (engine can't be started)
Ignition on, (engine can be started)
Ignition off, handlebar blocked
To switch the ignition to position
and firmly press it into the lock. Turn the handlebar all the way to
the left, then turn the ignition key to the left.
The ignition key can be withdrawn in position
B
is used to change the
turn the ignition key to position
and .