Rear Panel Controls - Ceriatone Plexi 50 User Manual

50w guitar amplifier

4) REAR PANEL CONTROLS

1) SEND ¼" instrument jack

2) RETURN ¼" instrument jack

3) IMPEDANCE SELECTOR three-way rotary selector

4) SPEAKERS ¼" speaker jacks (x2)

5) BIAS TEST probe jacks (x2)

6) COM probe jack

7) FULL / HALF 2-way toggle switch

8) HT FUSE

9) MAINS FUSE

10) MAINS IEC cable inlet

SEND ¼" instrument jack can be used to directly interface the preamps of the Plexi, thereby bypassing the power amplifier.

Conversely, this is usually used as the SEND of the effects loop. Plug the input of your effects unit, or interface device (ex – C-

lator, Klein-ulator) into this jack using ¼" instrument cable.

RETURN ¼" instrument jack can be used to directly interface the power amp of the Plexi, thereby bypassing the preamp and

using the amplifier as a power amplifier. Conversely, this is usually used as the RETURN of the effects loop. Plug the output of

your effects unit, or interface device (ex – C-lator, Klein-ulator) into this jack using ¼" instrument cable.

Table of Contents