Senco SFT10XP Operating Instructions Manual page 6

(1) Read and understand tool labels and manual. Failure to follow
warnings could result in DEATH or SERIOUS INJURY. (2) Operators and
others in work area MUST wear safety glasses with side shields. (3) Keep fingers AWAY from trigger
when not driving fasteners to avoid accidental firing. (4) See manual for triggering instructions.
(5) NEVER point tool at yourself or others in work area. (6) NEVER use oxygen or other bottled gases. Explosion may occur.
(7) MAX AIR PRESS. 120 PSI (8.3 BAR)
SaFEty WaRNiNgS
y y
The tool and air supply hose
must have a hose coupling such
that all pressure is removed from
the tool when the coupling joint
is disconnected.
y y
Do not load fasteners with trig-
ger depressed.
y y
Do not use tool without danger
label on tool. If label is missing,
damaged or unreadable, contact
your SENCO representative to
obtain a new label.
y y
Always place yourself in a firmly
balanced position when using or
handling the tool.
y y
For information on the "SENCO
Safety First Program," contact
your SENCO representative.
6