Safety Warnings - Senco SFT10XP Operating Instructions Manual

y y
Read and understand tool labels
and manual. Failure to follow
warnings could result in DEATH
or SERIOUS INJURY.
Save these instructions
y y
Use safety equipment. Always
wear ANSI Z87.1 safety glasses
with permanently attached side
shields. Dust mask, non-skid
safety shoes, hard hat, or hear-
ing protection must be used for
appropriate conditions. Failure
to do so could result in personal
injury.
y y
Stay alert, watch what you are
doing, and use common sense
when operating a power tool. Do
not use tool while tired or under
the influence of drugs, alco-
hol, or medication. A moment
RX
of inattention while operating
power tools may result in serious
personal injury.
y y
Never use tool in an explosive
atmosphere or in the presence
of combustible materials such as
flammable liquids, gases or dust.
y y
Never use oxygen, carbon
dioxide or any other bottled gas
as a power source for this tool;
the tool will explode and cause
serious injury.
y y
Always remove finger from trig-
ger when not driving fasteners.
Never carry the tool with finger
on or under trigger.
y y
uSE CautioN as these tools
will drive a fastener when the
trigger is pulled.
y y
Always assume the tool con-
tains fasteners. No horseplay.
Respect the tool as a working
implement.
y y
Keep tool pointed away from
yourself and others and connect
air to tool.
y y
Tools shall be operated at the
lowest pressure needed for the
application. This will reduce
noise levels, part wear, and
energy use.

SaFEty WaRNiNgS

Warning!
Personal Safety
Explosion Hazard
3