Senco SFT10XP Operating Instructions Manual page 5

SaFEty WaRNiNgS
y y
Make sure all screws and caps
are securely tightened at all
times. Make daily inspections for
free movement of trigger. Never
use the tool if parts are missing
or damaged.
y y
Never use a tool that leaks air or
needs repair.
y y
Use only parts, fasteners, and
accessories recommended or
sold by SENCO. Do not modify
tool without authorization from
SENCO.
y y
Use only clean, dry, regulated
compressed air at recommended
pressure.
y y
Do not connect tools to air pres-
sure that potentially exceeds 200
psig or 13.7 bar.
200 psig
13.7 bar
y y
Air compressors used to supply
compressed air to this tool must
comply with requirement ANSI/
ASME B 19.1–1995 (U.S.),
"Safety Standard For Air Com-
pressor Systems."
y y
Air hose must have a minimum
working pressure rating of 150
psig (10.3 bar) or 150% of the
maximum pressure produced in
the system, whichever is higher.
5