Changing The Time And Date - Olympus DS DS-3400 Instructions Manual

Setting Time and Date (Time & Date)
• You can choose the order of the year, month,
day by pressing the F2(D/M/Y or Y/M/D or M/
D/Y)* button while setting them.
Example: March 15, 2009
(Initial setting)
1
*The display will vary depending on the status of the
settings.
Press the PLAY/OK button to complete
3
the setup screen.
The clock will start from the set date and time.
Press the PLAY/OK button according to the time
signal.
Notes
• If you press the STOP button during the setup operation,
the settings are cancelled, and the recorder returns to the
previous screen.
• You can set the time and date from your PC using DSS
Player software (☞ P.59).
18
3 15 2009
M D Y
15 3 2009
D M Y
2009 3 15
Y M D

Changing the Time and Date

When the recorder's POWER/HOLD switch is
turned ON the [Time & Date] will be displayed
for two seconds. If the time and date is not
correct, set it using the procedure below.
+
–
1
Press the or button in the [Device
Menu] screen, then select [Time & Date].
See P.34 regarding the menu.
Device Menu
Beep
Cue/Rev Sound
Power Save
Time & Date
USB Class
Reset Settings
BACK EXIT
Press the PLAY/OK or 9 button.
2
The time and date screen appears. The hour
indicator flashes, indicating the start of the time
and date setup process.The following steps are
the same as Step 1 through Step 3 of "Setting
Time and Date (Time & Date)" (☞ P.17).
Press the F3 ( EXIT ) or 0 button to
3
complete the setting.