Ricoh MP C2004 series Read This First Manual page 27

Hide thumbs Also See for MP C2004 series:
Table of Contents

Advertisement

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Responsible party: Ricoh Americas Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
Product Name: Multi Function Peripheral
Model Number:
• MP C3004SP, MP C3004SPG
• MP C3504SP, MP C3504SPG
• MP C4504SP, MP C4504SPG
• MP C6004SP, MP C6004SPG
• MP C2004SP, MP C2004SPG
• MP C2504SP, MP C2504SPG
Installing the Ferrite Core
An Ethernet interface cable connected to the USB Device Server Option port and a telephone line
cable with a ferrite core must be used for RF interference suppression.
Part 68 of the FCC Rules regarding Facsimile Unit
1. This equipment complies with Part 68 of the FCC rules and requirements adopted by the ACTA. On
the cover of this equipment is a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXXX. If requested, this number must be provided to the telephone
company.
2. This equipment uses the RJ11C USOC jack.
3. A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
detail.
4. The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3).
Laws and Regulations
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents