Setting Recording Destination (Card Select)
By default, the recording destination is set to
the [SD] at the factory. To change the recording
destination, follow the procedure outlined
below.
1
1
Select [Card Select] at the [Device Menu]
screen, then press the OK/MENU or
9 button.
Refer to P.42 regarding each menu item settings.
Device Menu
Fingerprint
Card Select
Beep
Format
12
USB Class
Time & Date
BACK
26
F1, F3 button
+
OK/MENU,
9, 0
button
EXIT
2
Press the
or [micro SD].
Card Select
SD
micro SD
mSD
BACK
Press the OK/MENU button to
3
–
,
,
complete the setup screen.
[SD Card Selected] or [microSD Card Selected]
will light up on the display, and it will return to the
[Device Menu] screen.
If press the 0 or F1 ( BACK ) button the setting
will be cancelled and it will return to the [Device
Menu] screen.
The recording destination (
set will appear on the display.
Card Select
SD
microSD Card
Selected
BACK
Press the F1 ( BACK ) or 0 button to
4
return to the [Main Menu] screen, then
press the F3 ( EXIT ) or 0 button to
complete the setting.
+
–
or
button to select [SD]
EXIT
or
mSD
EXIT
) that was